How to Hook Up a Microphone to a Laptop
Download Article
Download Article
If you want to upgrade your computer's audio inputs with an external microphone, either for chatting or to do some home recording, you can learn to hook up your new set-up, whether you've got basic computer microphones or more professional XLR-type mics. If you're struggling to figure out why you're not getting a signal, you can also learn to troubleshoot in the final section.
-
1
Examine the jack on the microphone. Generally, most basic computer microphones will have one of two varieties of jack: an 1/8" TRS jack, which is essentially the same kind of jack you would find on a pair of headphones, or a USB jack, which is flat. Both of these jacks have corresponding ports on most computers.
- If you're using an XLR microphone, a quarter-inch jack, or some other variety of mic, skip to the next section.
-
2
Locate the corresponding port on your computer. Almost all desktop computers will have visible microphone ports on either the front or the back of the tower. Usually, this port will be colored pink, and have a microphone image over it. If you have an eighth-inch jack, all you've got to do is plug it into this port and start testing sound.
- If you have a USB jack on the end of your microphone, most computers will have two or more USB ports on the side, or the back of the computer. Simply plug the USB jack into one of these ports.
- Laptops and some more contemporary computers don't have microphone ports, because they're generally outfitted with internal microphones. It's usually possible to plug into the headphone port on most computers, however, and adjust your sound settings later.
Advertisement
-
3
Test your new microphone with the recording software of your choice. The easiest and quickest way to test your levels and check your settings is to go to your input sound options and make sure that the device you just plugged in is visible, and that it is selected for use. Open a recording program and attempt to use the microphone and set the levels.
- On Windows, you can use the Sound Recorder, on a Mac, Quicktime or GarageBand should do fine.
- If you're not getting a signal, skip to the last section for troubleshooting tips.
Advertisement
-
1
Examine the jack on the end of the microphone. Higher grade music microphones, condenser mics, and other professional gear will generally require an adapter or a converter cable before you plug them in. These range in price, and will vary depending on the type of microphone you're trying to input into the computer.
- If you see a triangle of prongs on the end of the end of the microphone, that's an XLR mic, and you'll need to get either a cable which converts the XLR jack into the eighth-inch port, a converter box which will convert it into USB, or a mixer.
- If the jack is a quarter-inch, the size of a guitar cable, you'll need to purchase an adapter cable that will convert into either USB or (more usually) eighth-inch size, and plug it into the mic port or the headphone port. These cables are usually quite cheap, no more than a few dollars.
-
2
Get the appropriate converter. Both of these types of mics will need to be connected to some kind of adapter before you plug them into the computer. Because these microphones are typically higher quality, it's best to invest in good adaption equipment to keep the signal as strong as possible.
- XLR mics can be adapted relatively cheaply with cables or a USB converter box, but some users find that this can be "crackly," losing some of the presence of good microphones. For the best sound quality, invest in a mixing board with a USB output.
- Quarter-inch to eighth-inch converter cables are widely available and pretty cheap to buy. You can find them at any electronics store or online electronics retailer.
-
3
Test your new microphone with the recording software of your choice. The easiest and quickest way to test your levels and check your settings is to go to your input sound options and make sure that the device you just plugged in is visible, and that it is selected for use. Open a recording program and attempt to use the microphone and set the levels.
- On Windows, you can use the Sound Recorder, on a Mac, Quicktime or GarageBand should do fine.
- If you're not getting a signal, skip to the next section for troubleshooting tips.
Advertisement
-
1
Check your sound input settings. If you're not getting a signal, navigate to your computer's sound settings and make sure that the correct device is selected, and the levels are appropriate.
- On a mac there are no drivers to get in the way, so the only other thing you need to do is to go into System Settings and click on "Sound," then select "Input." Make sure that the microphone is checked, rather than the built-in microphone.
- On a PC, go into the Control Panel and clicking on "Hardware and Sound," then click on "Sound" and it should pop up another windows. At the top, click on recording, and you should see your microphone there. If it doesn't have a green check mark next to it, it isn't selected. Click on it and click properties. You can then change the settings at the bottom to "Use this Device" and it will automatically use it next time it is plugged into your computer.
-
2
Set the input level. On most computers, you'll be able to control the level of the input volume. With lower quality mics, it'll usually need to be set somewhat high to get a half-way decent signal, but you don't want to blow out the levels, either. It's usually best to set it somewhere in the default range, about 50%.
- On a Mac, you can do this in the System Settings, under "Sound."
- On a PC, you can do this in "Hardware and Sound," under "Sound."
-
3
Check your speaker and computer volume. If you have external speakers, or have headphones plugged in, you need to double-check and make sure that the volume levels are adjusted properly, as well as the settings on your desktop, or you may not be hearing anything.
-
4
Check the settings on the microphone. Obviously, you need to make sure the microphone is switched on, the cable is plugged in flush, and that you've got any other settings adjusted correctly, depending on the microphone.
- Some condenser mics, and speaking microphones will have a variety of toggle settings, some of which might be louder, or feature a wider range of sound than others. Switch between them to get a sense for what sounds best for your purposes.
-
5
Check the setting in the specific program that you're using. Different audio processing programs will have a variety of input settings as well, that you need to check. Some recording software may still be set to pick up internal mics, or audio from other sources, even if you changed it in your system settings.
- For example if you are using Skype, go to: Tools>Options>Audio settings, and select your microphone. If your microphone isn't listed or still doesn't work then check whether it requires software or drivers to run.
-
6
Try restarting your computer. Sometimes, you'll need to close the program you're trying to use at least, or even restart to get some computers to recognize a new piece of hardware you've plugged in.
- If the microphone still doesn't work then try using another microphone or try using the microphone on another computer. This should help you figure out whether it is the computer or the microphone which is at fault.
Advertisement
Add New Question
-
Question
Where can I hook up my mic if I don't have a mic jack?
You can purchase an adapter. There are adapters that allow you to plug your mic into a USB port.
-
Question
Is it necessary to use phantom power for a mic connected to a desktop PC?
Phantom power is only needed on XLR condenser microphones that connect to a preamplifier. Most likely if you do have a condenser microphone for USB, it's already running phantom power.
-
Question
What should I do if my friend is keeping secrets from me?
You may want to ask them all about it.
-
Question
I have a mic but a broken mic port. How can I use this mic?
Get a adapter (try eBay) and put it into the headphone port. You can also get a different adapter to use in the USB port.
-
Question
How do I hook up a Bluetooth microphone to my laptop?
Go into Settings -> Bluetooth, then Scan or Add Device (depending on your OS). Turn on your microphone and, if necessary, hold down the appropriate button on it to make its Bluetooth connection. After it has successfully connected, ensure that the microphone is set as the input device in your sound settings.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
-
Make sure the microphone has the appropriate connector.
-
GarageBand on a Mac computer can be found either in the Dock, or in /Applications. If not installed, it is on your Additional Installs disc, sometimes labeled simply Disc 2
-
If you are hearing your voice too quiet try increasing the volume of your microphone.
-
Sound Recorder on a Windows computer can be found by typing sndrec32 into the Run dialog box
-
Be sure that you connected your mic before testing/configuring it.
Thanks for submitting a tip for review!
Advertisement
-
Do not connect your microphone to other ports instead of the appropriate pink-colored one. Doing so could damage the microphone or the port.
Advertisement
Things You'll Need
- A microphone to connect to your computer.
- A computer with a sound card or chip.
- A converter if you have an XLR or 1/4" TRS jack.
About This Article
Article SummaryX
1. Locate your computer's microphone port.
2. Purchase an adapter if needed.
3. Connect the microphone to the computer.
4. Make sure your volume is turned up.
5. Open Sound Recorder.
6. Click the Record button to test.
Did this summary help you?
Thanks to all authors for creating a page that has been read 661,153 times.
Is this article up to date?
How to Hook Up a Microphone to a Laptop
Source: https://www.wikihow.com/Connect-a-Microphone-to-a-Computer